Shift Mechanism
- It should not be possible to actuate starter if selector lever is in "S", "D" or "P" position, or Tiptronic setting.
- At speeds over 3 MPH (5 km/h), and with selector lever set to "N", shift lock solenoid should not engage, and should lock selector lever. Selector lever can be shifted into a driving gear. When travelling at speeds below 3 Mph (5 km/h), and shifting into selector lever position "N", shift lock solenoid must not engage until after approximately 1 second. Selector lever cannot be shifted out of "N" position until brake pedal is depressed.
- With selector lever in "P" position, ignition switched on and brake pedal not depressed, selector lever is locked and cannot be moved from "P" position. Shift lock solenoid locks selector lever.
- With Selector lever in "P" position, ignition switched on and brake pedal depressed, Shift lock solenoid releases selector lever. It is possible to shift into a driving gear. Slowly shift selector lever from "P" through "R, N, D, S", checking whether display on instrument cluster corresponds to selector lever position.
- With selector lever in "N" position, ignition on and brake pedal not depressed, selector lever is locked and cannot be shifted out of "N" position. Sift lock solenoid locks selector lever.
- With selector lever in "N" position, ignition on and brake pedal depressed, shift lock solenoid releases selector lever. It is possible to shift into a driving gear.
- With selector lever in "D" position, ignition and light switched on and selector lever shifted into Tiptronic gate, "D" symbol in selector lever display should no longer be illuminated and "+" and "-" symbols should illuminate. Selector lever position display in instrument cluster must switch from "PRDNS" to "654321" when selector lever is shifted into Tiptronic gate.
- Check and adjust selector lever cable. See SELECTOR LEVER CABLE under ADJUSTMENTS.