Front Wheel Drive

Before attempting toe adjustment, see PRELIMINARY CHECKS  and WHEEL ALIGNMENT WORK SEQUENCE  .

While rear axle toe is not adjustable on FWD models, toe can be evened out. By moving the rear axle (in the elongated holes), it is possible to even out individual toe settings.

Loosen mounting bolts at mounting brackets. While observing rear toe display on alignment computer, even out individual toe settings by moving axle beam within elongated holes in mounting brackets. See WHEEL ALIGNMENT SPECIFICATIONS  . Tighten rear axle mounting bracket bolts to 59 ft. lbs. (80 N.m).

If overall toe setting is outside permitted range, or if it is not possible to even out the individual settings, the axle beam must be checked for damage and replaced if necessary. It may also be necessary to check body alignment in the area of the rear axle mounting points and perform repairs as necessary.