Test-ID 01 ($01): Catalytic Conversion (Bank 1)
WARNING: This page is about a different car, the 2006 Audi TT, 2005 Audi TT, and 2004 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the scan tool.
- Start the engine and let run at idle speed.
- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select "Test-ID 01 ($01)".
- Select the desired "Test-ID".
- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 05 ($05) | P0420 | Catalytic converter monitoring bank 1, aging value. | 0.1016 | 0.1992 | Refer to P0420 under Test-ID 01 ($01): Catalytic Conversion (Bank 1) . |
| 07 ($07) | P0420 | Catalytic converter monitoring sum malfunction bank 1 + bank 2, aging value. | 0.281 | Refer to P0420 under Test-ID 01 ($01): Catalytic Conversion (Bank 1) . | |
| 08 ($08) | P0420 | Catalytic converter monitoring sum range malfunction bank 1, aging value. | 0.9961 | Refer to P0420 under Test-ID 01 ($01): Catalytic Conversion (Bank 1) . | |
| 10 ($0A) | Catalytic converter monitoring bank 1, aging value short test. | 0.8516 |
- If any component or system fails to meet the specified values, refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTCs or the corresponding diagnostic repair procedure.
- Switch the ignition off.
End of diagnosis