LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2003 >> TT Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (3.2L - Generic Scan Tool, Engine(S) Code: BHE) >> 28 - Ignition/Glow Plug System >> Ignition, Servicing >> General Information

General Information

WARNING: This page is about a different car, the 2006 Audi TT, 2005 Audi TT, and 2004 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

For all Ignition/Glow plug system component locations. Refer to → 28 IGNITION/GLOW PLUG SYSTEM .

For all Ignition/Glow plug system removal/installation procedures and torque specifications. Refer to → 28 IGNITION/GLOW PLUG SYSTEM .

Check the Technical Bulletins for information that may supersede any information included in this article.

NOTE:
  • All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through Audi.
  • Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool.
  • The manufacturers test box Test Box 105 Pin VAG1598/31 is available for purchase or rental.
scientia non olet · About LEMON Manuals