Code control module, initiating

NOTE: The correct coding value depends on the part number suffix of the installed multi-function steering wheel control module.

Indicated on display:

Fig 1: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (1 Of 9)

G02719378

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -1- to select "Check control module" function 01.

Indicated on display

Fig 2: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (2 Of 9)

G02719379

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display after approx. 5 seconds (example only):

Fig 3: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (3 Of 9)

G02719380

Courtesy of AUDI OF AMERICA, INC.

Make note of control module part number suffix.
Press --> button.

Indicated on display

Fig 4: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (4 Of 9)

G02719381

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -7- to select "Code Control Module" function 07.

Indicated on display:

Fig 5: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (5 Of 9)

G02719382

Courtesy of AUDI OF AMERICA, INC.

Confirm input using the -Q- button.

Indicated on display:

Fig 6: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (6 Of 9)

G02719383

Courtesy of AUDI OF AMERICA, INC.

Enter code number according to part number Index tables:
Coding through m.y. 2001. See Coding tables through m.y. 2001 .

Coding from m.y. 2002. See Coding tables from m.y. 2002 .

Coding example - control module suffix "C": 00101
- First digit: 0 = Standard
- Second digit: 0 = Standard
- Third digit; language version: 1 = English
- Fourth digit; Tiptronic: 0 = without Tiptronic
- Fifth digit; steering wheel version: 1 = Radio & Telephone operation
Confirm input using the -Q- button.
Control module identification will appear on the display together with the coding that was entered (00101.)

Fig 7: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (7 Of 9)
Courtesy of AUDI OF AMERICA, INC.
End coding by pressing --> button.

Indicated on display:

Fig 8: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (8 Of 9)

G02719385

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -6- to select "End output" function 06.

Indicated on display:

Fig 9: VAG1551 Scan Tool Display - Code Control Module, Initiating - Multi-Function Steering Wheel (9 Of 9)

G02719386

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.