LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2003 >> A6 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Generators & Regulators) >> Bench Testing >> Stator >> A4 & A6

A4 & A6

WARNING: This page is about a different car, the 2000 Audi S4, 2000 Audi A6, and 2000 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set ohmmeter on lowest scale. Connect ohmmeter leads between stator leads. If resistance is not about .09-.10 ohm, stator windings are open or shorted. Replace stator.
  2. Set ohmmeter on 1000x scale. Connect ohmmeter leads between stator core and stator lead. If continuity exists, stator is grounded. Replace stator.
scientia non olet · About LEMON Manuals