Control element diagnosis / Output Diagnostic Test Mode (DTM): Notes
NOTE:
- Control element diagnosis / Output DTM can only be performed if the selector lever is in "P" or "N," the engine is not running and the vehicle is stationary.
- Control element diagnosis / Output DTM is terminated if the engine is started, the vehicle starts to move or if a switch is not made within about 60 seconds to the next actuator. It is also terminated if the selector lever is moved to a position other than "P" or "N."
TRIGGERING SEQUENCE
| Triggering sequence |
|---|
| 1. Signal for back-up light |
| 2. Shift lock solenoid -N110- |