Sequence of operations

• Move seat backrest forward as far as it will go.
• Check current numerical value in measuring value block 002. See READ MEASURING VALUE BLOCK  .

Indicated on display (values in example):

Fig 1: V.A.G 1551 Scan Tool (ST) Display - Seat Control Element Sequence Of Operations - Driver's Seat Adjustment With Memory Control Module

Courtesy of AUDI OF AMERICA, INC.

Display zone 4 shows current numerical value (in example 34231).

• Note down this numerical value.

• Use the memory buttons to move the seat to the position for which the remote control key is to be programmed.
• Keep memory button pressed and within 10 seconds additionally press "Open" button on remote control key.
• Then release memory button after approx. 2 seconds.
• To check function, press a different memory button and adjust seat.
• Lock vehicle.
• Unlock vehicle with remote control key.

After opening driver's door, seat must move to programmed position.