LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2002 >> A6 Base >> Repair and Diagnosis >> Engine Performance >> System >> Ignition System, Generic Scan Tool - 3.0L V6 AVK >> Ignition system >> Ignition system, checking >> Check Camshaft Position (CMP) sensor >> Final procedures

Final procedures

After repair work, the following work steps must be performed in the mentioned sequence:

  1. - Check DTC memory. See MODE 3: CHECK DTC MEMORY .
  2. - If necessary, erase DTC memory. See MODE 4: RESET/ERASE DIAGNOSTIC DATA .
  3. - Generate readiness code. See READINESS CODE, GENERATING .
    • End diagnosis and switch ignition off.
scientia non olet · About LEMON Manuals