Check Control Module Versions (function 01): Notes
The information displayed is used in conjunction with a DTC table which has information on the possible causes for pinpointed repair steps.
Test requirements:
- All fuses OK according to wiring diagram
- Voltage supply OK (at least 11.5 V).
- Scan Tool VAG 1551 or VAG 1552 connected.
NOTE:
- Connecting Scan Tool. See VAS 5051 TESTER OR VAG 1551 SCAN TOOL, CONNECTING AND SELECTING FUNCTIONS .
- The following description applies only to Scan Tool VAG 1551.
- Switch on ignition.
- Switch on printer with the PRINT button (indicator lamp in button lights up).
- Press button -1- to select operating mode 1, "Rapid data transfer".
Indicated on display
Fig 1: V.A.G 1551 Scan Tool Display - Check Control Module Versions, Anti-Theft Immobilizer (1 Of 6)
- Press buttons -1- and -7- to input "Instrument Cluster" address word 17.
NOTE:
Because the immobilizer is integrated in the instrument cluster, the same address word must be used as for the instrument cluster.
Indicated on display:
Fig 2: V.A.G 1551 Scan Tool Display - Check Control Module Versions, Anti-Theft Immobilizer (2 Of 6)
- Press -Q- button to confirm input.
Indicated on display (example only): after approx. 5 seconds:
Fig 3: V.A.G 1551 Scan Tool Display - Check Control Module Versions, Anti-Theft Immobilizer (3 Of 6)
- 4D0919035AD: Part number of instrument cluster (see also replacement part program)
- D2-INSTRUMENT CLUSTER: component marking
- VDO: Manufacturer's code
- D19: Software version of instrument cluster
- Coding 16083: Coding of instrument cluster
- WSC 06812: dealership number
- Press --> button.
Indicated on display (example only): (example only):
Fig 4: V.A.G 1551 Scan Tool Display - Check Control Module Versions, Anti-Theft Immobilizer (4 Of 6)
- WAUZZZ4DZYN000126: 17 digit VIN (Vehicle Identification Number)
- AUZ7Z0W0801181: 14 digit identification number of control module for anti-theft immobilizer
- Press --> button.
If one of these messages is displayed, perform trouble shooting according to troubleshooting diagnostic.
Fig 5: V.A.G 1551 Scan Tool Display - Check Control Module Versions, Anti-Theft Immobilizer (5 Of 6)
Indicated on display
Fig 6: V.A.G 1551 Scan Tool Display - Check Control Module Versions, Anti-Theft Immobilizer (6 Of 6)
- Pressing the HELP button will print out an overview of all of the possible functions.
- Press the --> button to continue program sequence.