Headlights, adjusting: Continuation

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Indicated on display

Fig 1: VAG 1551 Scan Tool Display - Continuation (9 Of 16)

G02722969

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -4- to select "Basic Setting" function 04 and press -Q- button to confirm input.

Indicated on display

Fig 2: VAG 1551 Scan Tool Display - Continuation (10 Of 16)

G02722970

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0-, -0- and -1- to input display group number 1 (001) and press -Q- button to confirm input.

Indicated on display

Fig 3: VAG 1551 Scan Tool Display - Continuation (11 Of 16)

G02722971

Courtesy of AUDI OF AMERICA, INC.

The headlights move into adjustment position.

Indicated on display

Fig 4: VAG 1551 Scan Tool Display - Continuation (12 Of 16)

G02722972

Courtesy of AUDI OF AMERICA, INC.

NOTE: The headlights are now in the adjustment position. Turn on the headlights. Basic setting 1 switches off control operation, and "Headlights not set" appears in the display.

Using Phillips-head screwdriver or hex wrench turn adjustment screws -1- and -2- with same number of turns in same direction, until headlight beam is OK.
CAUTION: Adjustment screws -1- and -2- must be turned with the same number of rotations and always in the same direction.

Fig 5: Locating Adjustment Screws - High-Intensity Gas Discharge (Xenon) Headlights

G02722973

Courtesy of AUDI OF AMERICA, INC.

Press --> button.

Indicated on display

Fig 6: VAG 1551 Scan Tool Display - Continuation (13 Of 16)

G02722974

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -4- to select "Basic Setting" function 04 and press -Q- button to confirm input.

Indicated on display

Fig 7: VAG 1551 Scan Tool Display - Continuation (14 Of 16)

G02722975

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0-, -0- and -2- to input display group number 2 (002) and press -Q- button to confirm input.

Indicated on display

Fig 8: VAG 1551 Scan Tool Display - Continuation (15 Of 16)

G02722976

Courtesy of AUDI OF AMERICA, INC.

NOTE: The control module has now learned the position as the "control position." The entry in DTC memory "Headlights not set" is erased and the control operation begins again.

Press --> button.

Indicated on display

Fig 9: VAG 1551 Scan Tool Display - Continuation (16 Of 16)

G02722977

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -6- to select "End Output" function 06 and press -Q- button to confirm input.