Test requirements

Ignition switched on.

When indicated on display

Fig 1: VAG 1551 Scan Tool Display - Adaptation Throttle Valve Control Module (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press buttons "04" for the function "Basic Setting" and press -Q-button to confirm input.

When indicated on display

Fig 2: VAG 1551 Scan Tool Display - Adaptation Throttle Valve Control Module (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Input "060" for "display group number 60" and press -Q- button to confirm input.

When indicated on display

Fig 3: VAG 1551 Scan Tool Display - Adaptation Throttle Valve Control Module (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Check readiness code in display field 3 and 4:

DISPLAY GROUP 060: ADAPTATION OF THROTTLE VALVE CONTROL MODULE

	Display fields
	1	2	3	4
Display group 060: Adaptation of throttle valve control module
Display	xx %	xx %	x	-
Indicated	Throttle valve angle (angle sensor 1)	Throttle valve angle (angle sensor 2)	Adaptation step counter	Adaptation condition
Work area	0 - 100 %	100 - 0 %	0 - 8	ADP. runs ADP. OK ADP. ERROR
Specified value	3 - 93 %	97 - 3 %	8	ADP. OK
Note:			During adaptation, adaptation step counter must reach the number 8. (Some numbers may be skipped) .	If "ADP. ERROR." is displayed: Check DTC memory, see DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING AND ERASING . If specified value is not obtained: see Note in TEST CONDITIONS FOR ADAPTATION OF THROTTLE VALVE CONTROL MODULE .

Note for display field 3:

During adaptation different digits are displayed in display field 3, which indicate the particular adaptation condition. It is not important what the adaptation step counter (display field 3) displays during adaptation, rather that display field 4 displays the specification value "ADP. OK" .

If specified value "ADP. OK" is obtained:

Press -C- button.