Display group 2: Activating hydraulic pump for traction control -V156-

The hydraulic pump for traction control -V156- is activated to bleed the hydraulic system.

See BLEEDING BRAKE SYSTEM .

Connect the VAG1551 Scan Tool and select the address word 03 "Brake Electronics". See VAG1551 SCAN TOOL (ST), CONNECTING AND ENTERING ADDRESS WORD .

Indicated on display

Fig 1: VAG 1551 Scan Tool Display - Activating Hydraulic Pump For Traction Control -V156- (1 Of 5)

G02727369

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -4- to select "Basic Setting" function 04.

Indicated on display

Fig 2: VAG 1551 Scan Tool Display - Activating Hydraulic Pump For Traction Control -V156- (2 Of 5)

G02727370

Courtesy of AUDI OF AMERICA, INC.

Press the -Q- button to confirm input.

Indicated on display

Fig 3: VAG 1551 Scan Tool Display - Activating Hydraulic Pump For Traction Control -V156- (3 Of 5)

G02727371

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0-, -0- and -2-. Press -Q- button to confirm input.

Indicated on display

Fig 4: VAG 1551 Scan Tool Display - Activating Hydraulic Pump For Traction Control -V156- (4 Of 5)

G02727372

Courtesy of AUDI OF AMERICA, INC.

The hydraulic pump for traction control -V156- is activated for ten (10) seconds.

Advance through program sequence by pressing --> button.

Indicated on display

Fig 5: VAG 1551 Scan Tool Display - Activating Hydraulic Pump For Traction Control -V156- (5 Of 5)

G02727373

Courtesy of AUDI OF AMERICA, INC.