Diagnostic Trouble Code (DTC) Memory, checking (function 02)

• Switch printer on via the PRINT button (indicator lamp in button lights up).

Indicated on display

• Press buttons -0- and -2- to select "Check DTC memory", function 02.

Indicated on display

• Press -Q- button to confirm input.

The number of stored malfunctions appears in the display.

1. The stored malfunctions are displayed and printed out one after the other.

• Check print-out against DTC table and repair all malfunctions as necessary. See DIAGNOSTIC TROUBLE CODE (DTC) TABLE  .
  Fig 3: Identifying Scan Tool Display - Checking DTC Memory (Function 02) (3 Of 5)

  Courtesy of AUDI OF AMERICA, INC.

If "No DTC recognized!" is displayed, the program will return to "Select function XX" after the --> button is pressed.

Indicated on display

If something else is displayed:

See Operating instructions of Scan Tool (ST).

• End Output (function 06). See END OUTPUT (FUNCTION 06)  .
• Switch off ignition and disconnect diagnostic wire from Data Link Connector (DLC).