LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1999 >> A4 Base, 2.8 D, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - 2.8L >> Diagnostic Tests >> Notes

Diagnostic Tests: Notes

NOTE: It is necessary to generate a PCM readiness code if PCM memory is cleared, battery voltage is disconnected or PCM is disconnected. See CLEARING CODES in SELF-DIAGNOSTICS - INTRODUCTION article. If PCM was replaced, see PCM REPLACEMENT in SELF-DIAGNOSTICS - INTRODUCTION article.
NOTE: To properly diagnose vehicle, it is recommended to use VAG 1551 scan tool and VAG 1598/22 test box.
scientia non olet · About LEMON Manuals