LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1998 >> Cabriolet >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Lubrication >> Checking Fluid Level >> Front Final Drive

Front Final Drive

Place vehicle on level surface. Fluid level should be to edge of fill hole on side of case. If level is too high, cause may be from leaking seals between transaxle and final drive.

NOTE: If using Scan Tool (VAG 1551) and Fill Tool (VAG 1924), follow manufacturer's instructions.
scientia non olet · About LEMON Manuals