Specifications Index
A6 SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM GENERAL SERVICING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | |||
| Front | Step 1: 148 ft.lb (200 N.m) Step 2: Additional 1/4 turn |
||
| Battery | BATTERY SPECIFICATIONS | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | |||
| Service Specifications | DISC BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drum Brakes | |||
| Service Specifications | N/A | ||
| Torque | N/A | ||
| Charging | |||
| Generator | DESCRIPTION | ||
| Torque | GENERATOR | ||
| Drive Belts | |||
| Adjustment | Engine is equipped with serpentine belts and automatic belt tensioner, so no adjustment is necessary. | ||
| Drive Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | N/A | ||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | With engine oil temperature at least 176°F (80°C), oil pressure should be 29 psi (2.0 bar) minimum at 2000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| A/T | |||
| First step | 44 ft.lb (60 N.m) | ||
| Second step | 1/4 turn | ||
| M/T | |||
| First step | 44 ft.lb (60 N.m) | ||
| Second step | 1/2 turn | ||
| Fuel System | |||
| Pressure Specification | FUEL PUMP | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE TEST | ||
| Fuel Filter Location | N/A | ||
| Fuel Filter R & I | N/A | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER | ||
| Ignition Wires (Resistance) | Information is not available from manufacturer. | ||
| Ignition Wires (Routing) | N/A | ||
| Spark Plug | |||
| NGK BKUR6ET-10 | |||
| Gap | .035-.041 In. (.9-1.0 mm) | ||
| Torque | 22 ft.lb (30 N.m) | ||
| Starting | |||
| Starter | OVERHAUL | ||
| Torque | STARTER | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 81 ft.lb (110 N.m) | ||