Specifications Index
A4 SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM GENERAL SERVICING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | |||
| M14 | Step 1: 85 ft.lb (115 N.m) Step 2: Additional 1/2 turn |
||
| M16 | Step 1: 140 ft.lb (190 N.m) Step 2: Additional 1/2 turn |
||
| Battery | BATTERY SPECIFICATIONS | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | |||
| Service Specifications | DISC BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drum Brakes | |||
| Service Specifications | N/A | ||
| Torque | N/A | ||
| Charging | |||
| Generator | DESCRIPTION | ||
| Torque | GENERATOR | ||
| Drive Belts | |||
| Adjustment | ADJUSTMENTS | ||
| Drive Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | N/A | ||
| Thermostat R & I | |||
| 1.8L | THERMOSTAT | ||
| 2.8L | N/A | ||
| Water Pump R & I | |||
| 1.8L | WATER PUMP | ||
| 2.8 | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | |||
| 1.8L | Check oil pressure with engine at normal operating temperature. Oil pressure at idle should be is 14-36 psi (1-2.5 bar) at 3000 RPM, 44-73 psi. (3-5 bar). At higher RPM oil pressure should not exceed 100 psi (7.0 bar). | ||
| 2.8L | At normal operating temperature, oil pressure should be 44-73 psi (3.0-5.0 bar) at 3000 RPM. | ||
| Overhaul | |||
| 1.8L | ENGINE SPECIFICATIONS | ||
| 2.8L | ENGINE SPECIFICATIONS | ||
| Torque | |||
| 1.8L | TORQUE SPECIFICATIONS | ||
| 2.8L | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| 1.8L | First step: 22 ft.lb (30 N.m) Second step: 44 ft.lb (60 N.m) Third step: 1/4 turn |
||
| 2.8L | |||
| A/T | First step: 44 ft.lb (60 N.m) Second step: 1/4 turn |
||
| M/T | First step: 30 ft.lb (40 N.m) Second step: 1/2 turn |
||
| Fuel System | |||
| Pressure Specification | FUEL PUMP | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE TEST | ||
| Fuel Filter Location | N/A | ||
| Fuel Filter R & I | N/A | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER | ||
| Ignition Wires (Resistance) | Information is not available from manufacturer. | ||
| Ignition Wires (Routing) | N/A | ||
| Spark Plug | |||
| 1.8L | |||
| NGK BKUR7ET | |||
| Gap | .035-.041 In. (.9-1.0 mm) | ||
| Torque | 22 ft.lb (30 N.m) | ||
| 2.8L | |||
| NGK BKUR6ET-10 | |||
| Gap | .035-.041 In. (.9-1.0 mm) | ||
| Torque | 22 ft.lb (30 N.m) | ||
| Starting | |||
| Starter | OVERHAUL | ||
| Torque | STARTER | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 90 ft.lb (120 N.m) | ||