LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1996 >> Cabriolet >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pressure Release

Fuel Pressure Release

WARNING: ALWAYS release fuel pressure before disconnecting fuel injection-related component. DO NOT allow fuel to contact engine or electrical components.

Remove fuel pump relay. Start engine. Allow engine to run until it stalls. Turn ignition off. Disconnect negative battery cable. Slight pressure may remain in system. Before disconnecting any fuel system line, cover connector with a clean shop towel. Reinstall fuel pump relay.

scientia non olet · About LEMON Manuals