LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1994 >> 90 CS, 2.8 J, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Throttle Cable

Throttle Cable

NOTE: Adjust accelerator controls so transmission throttle lever is at zero throttle position with throttle closed. If adjustment is incorrect, shift speeds and transmission main line pressure will also be incorrect.
  1. Remove throttle control cover. Disconnect cruise control linkage (if equipped). Loosen throttle cable adjusting nuts and remove accelerator cable-top-mounting bracket retaining clip.
    NOTE: Pressure point for full throttle position of accelerator pedal must be about 5/8-13/16" (16-20 mm) from pedal stop.
  2. Turn throttle cable cam to full throttle position and hold. Insert a11/16" shim between accelerator pedal and pedal stop. Push pedal until it touches spacer and hold pedal in this position.
  3. Pull accelerator pedal cable housing until all slack is removed. Install locking clip. Lightly pull transmission throttle cable until spring pressure (resistance) of transmission kickdown is felt.
  4. Turn adjusting nut (closest to transmission) against bracket and tighten other nut. Release throttle cable cam and accelerator pedal. Remove spacer and install throttle control covering.
scientia non olet · About LEMON Manuals