LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1991 >> 90 Base, 2.3 C >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Distributor >> Removal & Installation

Removal & Installation

  1. Disconnect battery and remove air cleaner. Relieve fuel pressure. Disconnect all fuel and injector lines from fuel distributor. Plug fuel supply and return lines.
  2. Disconnect wiring from pressure regulator. Remove screws holding fuel distributor to airflow sensor housing. Remove fuel distributor by turning back and forth while lifting up. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals