LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1991 >> 100 Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Removal & Installation

Removal & Installation

  1. Fuel pump assembly is located inside fuel tank. Release fuel pressure from system. Remove luggage compartment cover. Disconnect electrical connectors and fuel hoses at fuel tank.
  2. Loosen retaining ring and pull unit out of fuel tank. Remove fuel pump from sending unit assembly. To install, reverse removal procedure. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS table at the end of article.
scientia non olet · About LEMON Manuals