LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1990 >> 90 Base, 2.3 D, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> Overhaul >> Bench Testing >> Stator

Bench Testing: Stator

  1. Place ohmmeter on lowest scale. Connect ohmmeter across stator leads. Resistance between leads should be approximately .09-.10 ohm. If resistance is incorrect, stator has open or shorted windings and must be replaced.
  2. Place ohmmeter on x1000 scale. Connect ohmmeter between stator core and stator lead. No continuity should exist. If continuity exists, stator is grounded and must be replaced.
scientia non olet · About LEMON Manuals