LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1989 >> 80 Quattro >> Repair and Diagnosis >> Engine Performance >> System >> System/Component Tests >> Engine Sensors & Switches >> Cis MOTRONIC >> Full Throttle Switch

Full Throttle Switch

  1. Connect multimeter between terminal No. 3 of throttle switch and ground. Switch multimeter to voltage range. Turn ignition on. Multimeter should read battery voltage. Fasten pointer for Protractor (3084) to adjuster for accelerator cable (using a rubber band).
  2. Screw protractor onto throttle shaft and unscrew throttle shaft nut (if necessary). Push throttle lever to full open (at stop limit) and zero pointer plus disc.
scientia non olet · About LEMON Manuals