LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1987 >> 5000 CS, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Test 19 >> 5000S & 5000CS Turbo

5000S & 5000CS Turbo

  1. Item Being Tested - ABS Control Unit Control Current For Left Front Solenoid Valve Place ABS tester in program switch position No. 19. Press button No. 8 and wait for button No. 5 to light up. Press button No. 5, while lit, and then release.
  2. Pump motor should start up 2 times. Display on ABS tester should read 4.5-6.1 amps after a few seconds. If correct, go to next step. If incorrect, repeat step 1) several times with engine running. If reading is still incorrect, replace ABS control unit.
  3. Item Being Tested - ABS Control Unit Control Current For Right Front Solenoid Valve Wait for digital display to zero. Press button No. 9 and wait for button No. 5 to light up. Press button No. 5, while lit, and then release.
  4. Pump motor should start up 2 times. Display on ABS tester should read 4.5-6.1 amps after a few seconds. If correct, go to next step. If incorrect, repeat step 3) several times with engine running. If reading is still incorrect, replace ABS control unit.
  5. Item Being Tested - ABS Control Unit Control Current For Left Rear Solenoid Valve Wait for digital display to zero. Press button No. 11 and wait for button No. 5 to light up. Press button No. 5, while lit, and then release.
  6. Pump motor should start up 2 times. Display on ABS tester should read 4.5-6.1 amps after a few seconds. If correct, go to next step. If incorrect, repeat step 5) several times with engine running. If reading is still incorrect, replace ABS control unit.
  7. Item Being Tested - ABS Control Unit Control Current For Right Rear Solenoid Valve Wait for digital display to zero. Press button No. 12 and wait for button No. 5 to light up. Press button No. 5, while lit, and then release.
  8. Pump motor should start up 2 times. Display on ABS tester should read 4.5-6.1 amps after a few seconds. If correct, TEST 19 is completed. If incorrect, repeat step 7) several times with engine running. If reading is still incorrect, replace ABS control unit.
NOTE: On 5000S and 5000CS Turbo, after TEST 19 is completed, perform TEST 24. TEST 24 must be performed before TEST 23.
scientia non olet · About LEMON Manuals