General Information
- Parking brake is released and transmission is in Neutral. If vehicle is towed with wheels on ground or with only rear end raised, steering column ignition lock must be in unlocked position. Secure steering wheel with a clamping device.CAUTION: Do not use vehicle's steering column lock to keep wheels in a straight ahead position.
- Secure steering wheel with a clamping device. Never attach tow chain or "J" hooks to any drive axle shaft, drive shaft or bumper. Do not lift or tow vehicle by attaching hooks to bumper energy absorber units.
- Always refer to instructions provided by manufacturer of hoisting equipment. If vehicle has been damaged, secure all loose or protruding parts. Cross all curbs at 45° angles.
- Towed vehicles should be raised until lifted wheels are at least 4" off ground. Brake drums and rotors should have at least 8" clearance. Make sure there is adequate ground clearance at opposite end of vehicle.
- Do not use large J-hooks to tow vehicles. Attach primary chains to towing eyelets on frame side rails using small hooks. Secondary (safety) chains should be attached through center of lower control arms.
- Always tow with front wheels off the ground. If vehicle must be towed from rear, move vehicle on dollies or flat bed truck. Tow chains must not be attached to bumper or drive shafts. Attach safety chains through center of lower control arms.