Removal And Installation

REMOVAL 

1. Remove the fuel pump module. Refer to MODULE, FUEL PUMP, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

2. Disconnect the electrical connection from the fuel level sensor.

   Courtesy of CHRYSLER GROUP, LLC

3. Adjust the retaining clips, raise and remove the fuel level sensor, releasing the relevant retaining clips from the housing on the submerged pump body.

INSTALLATION 

1. Reposition the fuel level sensor, complete with float, and secure it with the relevant retaining clips.
2. Connect the electrical connection for the fuel level sensor.
3. Install the fuel pump module. Refer to MODULE, FUEL PUMP, REMOVAL AND INSTALLATION .