Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Camber Link to Knuckle Mounting Bolt | 65 Plus 90° | 48 Plus 90° | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Camber Link to Crossmember Mounting Bolt | 65 Plus 90° | 48 Plus 90° | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Hub Nut | 71 Plus 47° | 52 Plus 47° | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Hub and Bearing to Knuckle Mounting Bolts | 100 | 74 | - | |
| Lower Control Arm to Crossmember Bolt - Front | 65 Plus 90° | 48 Plus 90° | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Lower Control Arm to Crossmember Bolt - Rear | 60 Plus 180° | 44 Plus 180° | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Lower Control Arm to Knuckle Bolt | 110 Plus 180° | 81 Plus 180° | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Shock Absorber to Lower Control Arm Mounting Bolt | 60 Plus 180° | 44 Plus 180° | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Shock Absorber to Body Mounting Bolts | 30 | 22 | - | |
| Stabilizer Bar to Crossmember Bolts | 20 | 15 | - | |
| Stabilizer Bar Link to Stabilizer Bar Nut | 100 | 74 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Stabilizer Bar Link to Lower Control Nut | 100 | 74 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Toe Link to Crossmember Mounting Bolt | 65 Plus 90° | 48 Plus 90° | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Toe Link to Knuckle Mounting Nut | 120 | 89 | - |