Variable Valve Timing Electromagnets In Intake Exhaust Timing System

REMOVAL 

1. Disconnect the negative battery terminal.
2. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

3. Disconnect the electrical connection for the variable valve timing electromagnet, intake side.
4. Undo the screw (2a) and remove the variable valve timing electromagnet (2b), intake side, with O-ring.

   Courtesy of CHRYSLER GROUP, LLC

5. Disconnect the electrical connection for the variable valve timing electromagnet, exhaust side.
6. Undo the screw (2a) and remove the variable valve timing electromagnet (2b), exhaust side, with O-ring.

INSTALLATION 

1. Place the variable valve timing electromagnet in its housing, exhaust side (1a), with new Oring, then tighten the screw (1b) to the prescribed torque.

   Component	Fixing	dia	Value (daNm)	Validity
   Variable valve timing system electromagnet	Screw	M5x0.8x14	0.4	1750 Turbo Petrol

2. Connect the electrical connection for the variable valve timing electromagnet, exhaust side.

   Courtesy of CHRYSLER GROUP, LLC

3. Place the variable valve timing electromagnet in its housing, intake side (1a), with new Oring, then tighten the screw (1b) to the prescribed torque.

   Component	Fixing	dia	Value (daNm)	Validity
   Variable valve timing system electromagnet	Screw	M5x0.8x14	0.4	1750 Turbo Petrol

4. Connect the electrical connection for the variable valve timing electromagnet, intake side.
5. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
6. Connect the negative battery terminal.

Courtesy of CHRYSLER GROUP, LLC