Diagnostic Test

DSCM Verification Test 

1. Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
2. With the scan tool, erase Drive Style Control Module (DSCM) DTCs.
3. Make sure that all accessories are turned off and that the battery is fully charged.
4. Test drive the vehicle and verify proper operation.
5. With the scan tool, read DSCM DTCs and record on the repair order.

   Are there any DTCs present in the DSCM?

   Yes 

   • Repair the DSCM DTC(s). Refer to DIAGNOSIS AND TESTING .

   No 

   • Repair is complete.