+B_EPS Circuit Inspection

Test Procedure 

• Preparation
• • EPS control unit connector A (2P): disconnected
• Procedure
• • Perform the inspection according to the following table.

(Disconnected) EPS control unit connector A (2P) female terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

+B_EPS circuit inspection 

OFF

12 V battery voltage[circuit type 1] 

Results 

• If abnormal, there is a problem in the circuit. If the power supply inspection of the above table showed abnormally, do the additional Power Supply Inspection , to locate the failure.