Clutch Pedal Stroke Sensor Zero Point Learning: Procedure

How to use this service information .

NOTICE: 

The clutch pedal stroke sensor zero point must be learned whenever you do any of these actions:

• Updating or replacing the VSA modulator-control unit.
• Removing the clutch pedal stroke sensor.

1. Clutch Pedal Stroke Sensor Zero Point - Learn

   Procedure 

   1. Turn the vehicle to the ON mode without pressing the clutch pedal.

   2. Wait for 2 seconds, then make sure that the VSA indicator goes OFF.

   NOTE:

   • If the VSA indicator goes OFF, the clutch pedal stroke sensor zero point learning is complete.
   • If the VSA indicator blinks, the learning failed. Turn the vehicle to the OFF mode, and try again.