EOPVB [EOP_RLY_OUT] Shorted Wire Inspection

Test Procedure 

• Preparation
• • -

    Electric oil pump connector (4P): disconnected

  • -

    Electric oil pump relay: disconnected

• Procedure
• • -

    Perform the inspection according to the following table.

    Refer to the Open/Shorted Wire Inspection Description for the method to inspect the shorted circuit below, then start to inspect according to circumstances.

(Disconnected) Electric oil pump connector (4P) female terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

EOPVB [EOP_RLY_OUT] shorted to power inspection 

ON

Not shorted 

Results 

• If abnormal, there is a problem in the circuit.