Before Aiming Setting (Static Camera Aiming): Adjustment: Notes

How to use this service information .

Precautions before aiming setting: 

Set up the vehicle: 

• Make sure the suspension has not been modified.
• Make sure all tire sizes are correct and that their pressures are correct.
• Make sure the steering wheel is pointed straight ahead, and do not turn it after setting the vehicle.
• Remove all cargo from the vehicle except the tool kit and the spare tire (if equipped).
• Shift the transmission to P position/mode (CVT) or neutral position (M/T), and apply the parking brake.
• Make sure that all doors are closed.

Conditions for the aiming environment: 

• Aiming should be done in a well-lighted area.
• There should be no bright objects at the back of the target (sunlight, windows, illumination, or reflectors) or designs similar to the target pattern.
• When the multipurpose camera is adjusted on a floor surface that are not flat floor (drainage slope etc.), the camera aiming cannot be adjusted correctly, check the levelness of the floor surface.
• If oil drips on the floor, wipe it off.

Prepare these items: 

• Tape measure and ruler
• Felt-tip pen
• Tape
• String (A laser cross liner can be used as an alternative)
• Plumb bob