Fuel And Emissions - Troubleshooting
- How to Information
- How to Troubleshoot the Fuel and Emissions Systems (1.5L Engine)
- Before Troubleshooting
- System Indicator
- How to Read DTCs with the HDS
- If the MIL did not stay on
- If you cannot duplicate the DTC
- On-Board Snapshot
- HDS Clear Command
- Scan Tool Clear Command
- How to End a Troubleshooting Session (required after any troubleshooting)
- How to Troubleshoot Circuits at the PCM Connectors
- OBD Status
- How to Troubleshoot the Fuel and Emissions Systems (2.0L Engine) (2024 2025)
- Before Troubleshooting
- System Indicator
- How to Read DTCs with the HDS
- If the MIL did not stay on
- If you cannot duplicate the DTC
- On-Board Snapshot
- HDS Clear Command
- Scan Tool Clear Command
- How to End a Troubleshooting Session (required after any troubleshooting)
- How to Troubleshoot Circuits at the PCM Connectors
- OBD Status
- How to Troubleshoot the Fuel and Emissions Systems (1.5L Engine)
- Symptom Troubleshooting Index
- Symptom Troubleshooting
- Description & Operation
- DTC Troubleshooting Index
- Troubleshooting
- Fuel Pump Circuit Troubleshooting (1.5L Engine)
- Fuel Pump Circuit Troubleshooting (2.0L Engine) (2024 2025)
- Fuel and Emissions Systems Symptom Troubleshooting - Engine stalls, Engine will not start, Engine starts but stalls immediately, Engine is hard to start (1.5L Engine)
- Notes
- Inspection Outline
- Confirmation Procedure
- Related Information
- HDS Function
- 12 Volt Battery Terminal Visual Inspection
- Power Supply Relay Inspection
- Connector/Circuit Terminals Inspection
- Ground Cable/Terminal Inspection
- IG1(IGN) Circuit Inspection
- +B_INJ Circuit Inspection
- INJ_RLY_OUT, FI_MAIN_RLY_CL- Circuit Inspection
- ECT Sensor 1 Inspection
- CMP Sensor Inspection (No Pulse)
- CMP Sensor Inspection (Noise)
- CKP Sensor Inspection (No Pulse)
- CKP Sensor Inspection (Noise)
- Fuel Inspection
- Ignition Coil Inspection
- Spark Plug Visual Inspection
- MAF Sensor Visual Inspection
- MAP Sensor Visual Inspection
- EVAP Canister Purge Valve Inspection (Stuck Open)
- Rocker Arm Oil Control Valve Inspection
- Engine Mechanical Inspection
- A/C System Inspection (A/C Compressor Clutch)
- A/C System Inspection (A/C System Dragging)
- CVT System Inspection (In-Gear Timing)
- CVT System Inspection (Torque Converter Clutch Disengage)
- PCM Inspection
- Fuel and Emissions Systems Symptom Troubleshooting - Engine stalls, Engine will not start, Engine starts but stalls immediately, Engine is hard to start (2.0L Engine) (2024 2025)
- Notes
- Inspection Outline
- Confirmation Procedure
- Related Information
- HDS Function
- 12 Volt Battery Terminal Visual Inspection
- Power Supply Relay Inspection
- Connector/Circuit Terminals Inspection
- Ground Cable/Terminal Inspection
- IG1(IGN) Circuit Inspection
- ECT Sensor 1 Inspection
- CMP Sensor Inspection (No Pulse)
- CMP Sensor Inspection (Noise)
- CKP Sensor Inspection (No Pulse)
- CKP Sensor Inspection (Noise)
- Fuel Inspection
- Ignition Coil Inspection
- Spark Plug Visual Inspection
- MAF Sensor Visual Inspection
- MAP Sensor Visual Inspection
- EVAP Canister Purge Valve Inspection (Stuck Open)
- Rocker Arm Oil Control Valve Inspection
- Engine Mechanical Inspection
- A/C System Inspection (A/C Compressor Clutch)
- A/C System Inspection (A/C System Dragging)
- PCM Inspection
- Component Location Index
- Symptom Troubleshooting Index for Viewer
- General Information