IG1_METER Open Wire Inspection

Test Procedure 

• Procedure
• • Perform the inspection according to the following table.

(Connected)Body control module connector A (66P) female terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

IG1_METER open wire inspection 

ON

12 V battery voltage [circuit type 1] 

Results 

• If it is abnormal, there is a problem in the circuit.

  If the power supply inspection of the above table showed abnormally, do the additional Power Supply Inspection , to locate the failure.

• If it is normal, there is a problem with the body control module.