IG1_Relay1 Circuit Inspection

Test Procedure 

• Preparation
• • -

    Gauge Control Module Connector A (32P): Disconnected

• Procedure
• • -

    Perform The Inspection According To The Following Table.

(Disconnected)Gauge Control Module Connector A (32P) female Terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

IG1_Relay1 Circuit Inspection 

On

12 V Battery Voltage [Circuit Type 1] 

Results 

• If Abnormal, There Is A Problem In The Circuit.

  If The Power Supply Inspection Of The Above Table Showed Abnormally, Do The Additional Power Supply Inspection , To Locate The Failure.