Power Windows System Description
Basic Control/Function
- Manual Up/Down Function
The 1-step operation of the power window switch moves the window up or down. This is available when the vehicle is in the ON mode or during the vehicle OFF operation function.
- Auto Up/Down Function
The 2-step operation of the power window switch moves the window up or down automatically. This is available when the vehicle is in the ON mode or during the vehicle OFF operation function.
Auto Reverse Power Window Function
When an object is detected during the auto up operation, the window stops closing and reverses about 70 mm (2.76 in). If the window is less than halfway opened (about 220 mm (8.66 in)), it will reverse to the half open position (about 220 mm (8.66 in)). In manual operation, this function is active for the passenger power windows equipped with AUTO UP/DOWN function. This function is activated based on the calculation of the rotation speed and load change of motor's pulse A.
Vehicle OFF Operation Function
The vehicle OFF operation is controlled by the power window master switch. During a certain period of time after the vehicle OFF (LOCK) mode, the window's open/close operation by the power window switches is available.
| Vehicle OFF Operation Start Condition |
|
|
| Vehicle OFF Operation Cancel Condition | Timer | Vehicle ON mode -> OFF (LOCK) mode and elapsed 10 minutes |
| Door | Driver's door or front passenger's door switch ON (Door open) | |
Keyless/Key Cylinder Operation Function
By pressing the UNLOCK (or LOCK) button on the remote a second time and holding it, the windows and the sunroof open (or close). The windows and the sunroof stop moving when the UNLOCK (or LOCK) button is released.
By turning the key a second time and holding it with the key inserted into the driver's door key cylinder, the windows and the sunroof close (or open) (turn the key to UNLOCK direction to open, turn the key to LOCK direction to close). The windows and the sunroof stop moving when the key is returned to the neutral position.
| Keyless Operation | Open | Possible |
| Close | Not possible | |
| Key Cylinder Operation | Open | Possible |
| Close | Possible |
*: Control is different depending on the specifications.
Continuous Operation Stop Function
With the vehicle in the ON mode, when reciprocating movement "upper end -> lower end -> upper end" is repeated 5 times using the AUTO or MANUAL operation of each seat, the DOWN operation is prohibited for about 30 seconds.
Failsafe Function
When a failure occurs in the inputs of the motor pulses and power window switches, the failsafe function stops the control of each function.