EXT_M+, EXT_M- Shorted Wire Inspection
Test Procedure
- Preparation
-
- -
Body control module connector C (66P): disconnected
- -
Rear interior LF antenna 2P connector: disconnected
- -
- Procedure
-
- -
Perform the inspection according to the following table.
- -
(Disconnected)Body control module connector C (66P) female terminals
IG Mode
Normal Conditions
EXT_M+, EXT_M- shorted wire to wire inspection
OFF
There is more than 1 MOhm
Refer to the Open/Shorted Wire Inspection Description
for the method to inspect the shorted circuit below, then start to inspect according to circumstances.
EXT_M+ shorted to ground inspection
OFF
Not shorted
EXT_M- shorted to ground inspection
OFF
Not shorted
Results
- If abnormal, there is a problem in the circuit.