LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2021 >> TLX Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Mechanical And Engine Control System - Service, Testing And Troubleshooting (2 Of 2) >> General Information >> How to Set Readiness Codes (3.0L Engine) >> Evaporative Emission (EVAP) Control System Monitor and Readiness Code

Evaporative Emission (EVAP) Control System Monitor and Readiness Code

NOTE: All readiness codes are cleared when the 12 volt battery is disconnected, if DTCs have been cleared, or if the PCM is reset with the HDS.

Enable Criteria and Procedure 

Refer to the advanced diagnostic information for DTC P0456 - Refer to: DTC Advanced Diagnostics: P0456(3.0L Engine) or DTC Advanced Diagnostics: P0456(2.0L Engine) , P04DF - Refer to: DTC Advanced Diagnostics: P04DF(2.0L Engine) or DTC Advanced Diagnostics: P04DF(3.0L Engine) , P04F0 - Refer to: DTC Advanced Diagnostics: P04F0(2.0L Engine) or DTC Advanced Diagnostics: P04F0(3.0L Engine) , and P04F1 - Refer to: DTC Advanced Diagnostics: P04F1(2.0L Engine) or DTC Advanced Diagnostics: P04F1(3.0L Engine) , and do the confirmation procedures described in the advanced diagnostic information.

scientia non olet · About LEMON Manuals