Confirmation Procedure
Do the auto idle stop system inspection .
NOTE:
- Some prohibited condition of the auto idle stop system can be checked by the parameter of the HDS. Check the following parameters while a vehicle stops. If the parameter is indicated INHIBITED, the auto idle stop is prohibited by its item.
- There is a parameter that is not supported by the application. Parameters that are not supported will not be displayed.
-
- Idle Stop Inhibit (EPS Unit)
- Idle Stop Inhibit (ABS/VSA Unit)
- Idle Stop Inhibit (HVAC)
- Idle Stop Inhibit (Battery Management System)
- Idle Stop Inhibit (Brake System)
- Idle Stop Inhibit (DC-DC Converter)
- Idle Stop Inhibit (Idle Stop Cancel Switch)
- Idle Stop Inhibit (Hood Open)
- Idle Stop Inhibit (Seat Belt Unfastened)
- Idle Stop Inhibit (PCU)
- Idle Stop Inhibit (Battery Deterioration)
- Idle Stop Inhibit (AT/CVT: Precondition)
- Idle Stop Inhibit(AT/CVT: Transition Condition)
- Idle Stop Inhibit (Low Battery Voltage)
- Idle Stop Inhibit (Hood Open History)
- Idle Stop Inhibit (Driving History)
- Idle Stop Inhibit (Precondition)
- Idle Stop Inhibit (Inclined State)
- Idle Stop Inhibit (Operating Condition)
- Idle Stop Inhibit (Barometric Air Pressure)
- Idle Stop Inhibit (Large battery internal resistance)
- Idle Stop Inhibit (Drive mode)
2. If the auto idle stop system does not work and any of the HDS listed above are INHIBITED, the failure is duplicated.