DTC U0132: Notes
DTC U0132 : Gauge Control Module Lost Communication with Adaptive Damper Control Unit
NOTICE:
Before you troubleshoot, review the How to Troubleshoot .
NOTE:
- If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A - Refer to: Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode A - Initial Communication and DTC Checks .
- DTC may be stored if adaptive damper control unit does not start normally.
- DTC may be stored due to the power/ground circuit failure of the adaptive damper control unit. Before this troubleshooting, check the power/ground circuit of the adaptive damper control unit first.