CMP Sensor B Inspection

Preconditions 

• External circuit is normal

Test Procedure 

• Preparation
  • CMP sensor B 3P connector: disconnected

• Procedure
  • Perform the inspection according to the following table.

    			(Disconnected) CMP sensor B 3P connector female terminals
    		IG Mode	Courtesy of HONDA, U.S.A., INC.	Normal Conditions
    	PCM output voltage inspection	ON		About 5.0 V
    		ON		About 5.0 V

Results 

• If it is normal, there is a problem in CMP sensor B.
• If it is abnormal, there is a problem with the related components.