Power Window Master Switch Connector for Inputs and Outputs

Power Window Master Switch 37P Connector (female terminals)

Courtesy of HONDA, U.S.A., INC.

POWER WINDOW MASTER SWITCH 37P CONNECTOR INDEX

Terminal number	Terminal name	Description	Signal
1	P/W_DR_MTR_DOWN	Drives driver's power window motor	With driver's power window motor DOWN operation: about battery voltage If none of the above conditions are met: less than 0.2 V
2	P/W_DR_MTR_UP	Drives driver's power window motor	With driver's power window motor UP operation: about battery voltage If none of the above conditions are met: less than 0.2 V
3	PGND	Ground for power window master switch	Less than 0.2 V at all times
4	+B_DR_P/W (20A)	Power source for power window master switch	About battery voltage at all times
5	DR_MEMORY_SEAT_SW_POS1	Detects DR_MEMORY_SEAT_SW_POS1 signal	With driving position memory switch 1 ON: less than 0.2 V With driving position memory switch 1 OFF: about battery voltage
6	DR_MEMORY_SEAT_SW_POS2	Detects DR_MEMORY_SEAT_SW_POS2 signal	With driving position memory switch 2 ON: less than 0.2 V With driving position memory switch 2 OFF: about battery voltage
7	DR_KEY_CYL_LOCK	Detects DR_KEY_CYL_LOCK signal	With driver's door key cylinder switch LOCK: less than 0.2 V If none of the above condition are met: about battery voltage
8	DR_KEY_CYL_UNLOCK	Detects DR_KEY_CYL_UNLOCK signal	With driver's door key cylinder switch UNLOCK: less than 0.2 V If none of the above condition are met: about battery voltage
9	Not used	---	---
10	Not used	---	---
11	Not used	---	---
12	Not used	---	---
13	Not used	---	---
14	Not used	---	---
15	H/MIRROR_DR	Outputs H/MIRROR_DR signal	With mirror defogger ON: about battery voltage
16	DR_MEM_SEAT_SW_GND	Ground for driving position memory switch	With door multiplex control unit is wake up mode: less than 0.2 V
17	DR_MEMORY_SEAT_SW_MEMORY	Detects DR_MEMORY_SEAT_SW_MEMORY signal	With driving position memory set switch ON: less than 0.2 V With driving position memory set switch OFF: about battery voltage
18	IG2_OPTION	IG2 power source	With the vehicle in the ON mode: about battery voltage
19	Not used	---	---
20	DR_SIL_UNLOCK	Detects DR_SIL_UNLOCK signal	With door multiplex control unit is wake up mode and driver's door lock knob switch LOCK: about 5 V With driver's door lock knob switch UNLOCK: less than 0.2 V
21	DR_SIL_LOCK	Detects DR_SIL_LOCK signal	With door multiplex control unit is wake up mode and driver's door lock knob switch UNLOCK: about 5 V with driver's door lock knob switch LOCK: less than 0.2 V
22	DR_MEMORY_SEAT_SW_IND1	Outputs DR_MEMORY_SEAT_SW_IND1 signal	Driving position memory switch indicator 1 ON: pulse (depending on indicator brightness) Driving position memory switch indicator 1 OFF: less than 0.2 V
23 *	RETRA_MIRROR_SW	Detects RETRA_MIRROR_SW signal	With the vehicle in the ON mode and power mirror retract switch in EXTEND position: less than 0.2 V With the vehicle in the ON mode, and power mirror retract switch in RETRACT position: about battery voltage
24	DR_MEMORY_SEAT_SW_IND2	Outputs DR_MEMORY_SEAT_SW_IND2 signal	Driving position memory switch indicator 2 ON: pulse (depending on indicator brightness) Driving position memory switch indicator 2 OFF: less than 0.2 V
25	Not used	---	---
26	Not used	---	---
27 *	DR_RETRA_OPEN	Drives retract actuator	With the vehicle in the ON mode, and power mirror EXTEND operation: about battery voltage If none of the above conditions are met: less than 0.2 V
28 *	RETRA_CLOSE	Drives retract actuator	With the vehicle in the ON mode, and power mirror RETRACT operation: about battery voltage If none of the above conditions are met: less than 0.2 V
29	GND	Ground for power window master switch	Less than 0.2 V at all times
30	P/W_SW_ILLUMI	Outputs P/W_SW_ILLUMI signal	With combination light switch PARKING: about battery voltage With combination light switch OFF: less than 0.2 V
31	B-CAN_L	Communication line	---
32	B-CAN_H	Communication line	---
33	P/W_DR_MTR_PLSA	Detects P/W_DR_MTR_PLSA signal	---
34	P/W_DR_MTR_VCC	Outputs P/W_DR_MTR_VCC signal	With door multiplex control unit is wake up mode and driver's power window motor operation: about battery voltage If none of the above conditions are met: less than 0.2 V
35	P/W_DR_MTR_PLSB	Detects P/W_DR_MTR_PLSB signal	---
36	LIN (P/W)	Communication line	---
37	+B_BACK_UP	Power source for power window master switch	About battery voltage at all times
*: With power retract mirror