DTC P0562
DTC P0562 : Charging System Low Voltage
NOTE:
- Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information .
- Check for a loose terminal on the alternator (+B terminal). If the alternator +B terminal was loose, DTC P0562 will be stored.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P0562 Charging System Low Voltage |
DTC (PGM-FI)
- DTC check
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Start the engine, and let it idle without load (in P or N) for 1 minute.
-4. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P16BB Alternator B Terminal Circuit Low Voltage Is DTC P16BB indicated?
YES
Do the troubleshooting for DTC P16BB .
NO
Go to step 2.
- Problem verification
-1. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P0562 Charging System Low Voltage Is DTC P0562 is indicated?
YES
The failure is duplicated. Repair or replace the alternator .
NO
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the +B terminal on the alternator and the under-hood fuse/relay box.