| Confirmation Procedure |
Basic Condition:
- Battery voltage 10 - 16 V
Operating Condition:
- 1.
Turn the vehicle to the ON mode.
- 2.
Turn the vehicle to the OFF (LOCK) mode.
- 3.
Start the engine.
- 4.
Turn the steering wheel left and right, and keep holding each direction for 10 seconds.
- 5.
Return back the steering wheel to the center position.
|
| Execution |
Regular Diagnosis |
| Duration |
About 1 second |
| DTC Type |
- 1 drive cycle
- EPS indicator on
|
| Fail Safe Action |
- Stops EPS function/assist
|
| Possible Cause |
- Steering gearbox internal circuit failure
- Steering gearbox internal failure (Temperature sensor)
|