Driving Position Memory System Description - Control/Function

Memorizing a Seat, Mirror, and Steering Position 

Turn the vehicle to the ON mode, and then move the seat, the mirrors, and the steering column to the desired position. Press and hold the SET button on the driving position memory switch. A single beep will be heard and both of the green LED will begin to flash. Press No. 1 or No. 2 to match the remote that is to be used. There will be two more beeps confirming that the seat, the mirror, and the steering column positions have been memorized. The LED will remain lit, unless the seat and the mirrors are moved from the memorized position.

Memorized Position Recall with the Remotes 

After the seat, the mirror, and the steering column positions have been memorized, the seat, the mirrors, and the steering column will move to the position when the appropriate remote UNLOCK is pressed and the driver's door is opened. When the seat and the mirrors move to the memorized position, the steering column moves to the memorized position, after vehicle to ON mode. The green LED corresponding with that remote will stay lit until the position is changed or the vehicle is turned to the OFF (LOCK) mode.

Memorized Customized Setting Recall with the Remotes 

Customize setting are controlled independently by remotes (Driver 1 and Driver 2).

Reverse Mirror Control 

When shifting the transmission into R position/mode with the power mirror selector switch in Left (or Right) position, the driver's (or passenger's) side mirror tilts down automatically to help the driver's view. The mirror will return to the previous position when shifting out of R position/mode. The reverse mirror control is cancelled if the power mirror selector switch is in the center position.