LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2017 >> ILX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System / Engine Mechanical - Service, Testing And Troubleshooting (Except Hybrid) >> General Information >> How to Set Readiness Codes (2013 2014 2015) >> Evaporative Emission (EVAP) Control System Monitor and Readiness Code

Evaporative Emission (EVAP) Control System Monitor and Readiness Code

NOTE:  All readiness codes are cleared when the 12 volt battery is disconnected, if DTCs have been cleared, or if the PCM is reset with the HDS.

Enable Criteria and Procedure 

Refer to the advanced diagnostic information for DTC P145C and P0456 , and do the confirmation procedures described in the advanced diagnostic informations.

scientia non olet · About LEMON Manuals