LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TSX Base, 4D Wagon >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 61 (Power Windows (V6)) >> Power Window Master Switch Replacement

Power Window Master Switch Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Carefully remove the power window master switch (A).
    Fig 1: Identifying Power Window Master Switch And 37P Connector
    G06946732Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Disconnect the 37P connector (B) from the power window master switch.
  3. Remove the four screws and the power window master switch (A).
    Fig 2: Identifying Power Window Master Switch With Screws
    G06946733Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the switch in the reverse order of removal.
  5. Reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT  ).
scientia non olet · About LEMON Manuals