LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2014 >> TL SH-AWD, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System >> DTC Troubleshooting >> DTC 1305: Gyro Error 2

DTC 1305: Gyro Error 2

NOTE:
  • Check the vehicle battery condition first (see BATTERY TEST ).
  • This navigation DTC sets when there is a problem with the internal yaw rate sensor.
  • Before you troubleshoot, make sure to follow the General Troubleshooting Information .
  1. Check that the passenger compartment temperature is between - 4°F (- 20°C) and 158°F (70°C).
  2. Clear the hard error code .
  3. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or the ON mode.
  4. Check for the hard error code .

    Is DTC 1305 Indicated? 

    YES  - Replace the audio-navigation unit . ■

    NO  - Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit . ■